6061-T652Aluminum square bar stock

Production Introduction
6061 T652 Aluminum alloy is a high quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength can not be compared with 2xxx alloy system or 7xxx alloy system, but its magnesium and silicon alloy has many characteristics, and it has excellent processing performance and excellent welding features and electroplating property, good corrosion resistance, high toughness and no deformation after processing, dense and imperfect material and easy to polish, coloring film is easy to be coated, excellent oxidation and other excellent features.



 
   Chemical Compositionof Aluminum square bar stock

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Zr	Fe Ni	Other	Al
6061	0.4- 0.8	0.7	0.15-0.40	0.15	0.8- 1.2	0.04-0.35	0.25	0.15	-	--	0.15	Remainder

 
Mechanical Property of Aluminum square bar stock
Tensile strength（Mpa）≥320
Yield Strength（Mpa）≥260
Elongation（％）≥11
BH:88
 
Product Features of Aluminum square bar stock
1. Excellent processing performance, excellent weldability, electroplating property;
2. Good corrosion resistance, high toughness and pre-stretched plate shall no deformation after processing;
3. Material is compact, easy to polish, the coloring film is easy to be coated, the oxidation effect is excellent;
4. High strength, there is a certain heat resistance, can be welded.
 
Typical Usageof Aluminum square bar stock
　　6061-T652 Aluminum square bar stock is mainly used in rail transportation, automobile manufacturing, aerospace fixtures, electrical fixtures, communications, also widely used in automated mechanical parts, precision machining, mold manufacturing, electronics and precision instruments, SMT, PC board solder etc .