Send Inquiry x
I can help you
Send
Keywords : Aluminium block | Aluminum engine block
PRODUCTS
PRODUCT CENTER
SERVICE PHONE
+86-371-55689814

Tel :

+86-371-55689814
Address :Zhengzhou City, Henan Province, China
Tel:+86-371-55689814
Fax:+86-371-55686475
Email:frank@signialuminium.com

Vehicle Wheel Block

Aluminium block for vehicle wheel  
Alloy 2024 ,5052,5083,5454

 
   Signialuminium specilizes in procesing Aluminium block for vehicle wheel , we have the slitter line, slab cutting line, shear line. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest Aluminium block for vehicle wheel which is the most economical and reasonable.


 
  Aluminium block for vehicle wheel, offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their good formability, heat resistance,high strength, especially the anti fatigue strength, ductility and high corrosion resistance.etc,the Aluminium block can be used for different vehicle wheel.
 
General Specification

Alloy Temper Specification (mm)
Thickness Width Length
.2024 ,5052,5083,5454
 
H111, H112, H116,T4, T6, T651 6~300mm 100~2600 500~16000
Remark: special specifications can be produced accordingly to your requirement.
 
Main Aluminum Alloy Chemical Composition

Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Others Alu min
each Total
2024 0.50 0.50 3.8~4.9 0.3~0.9 1.2~1.8 0.1 - 0.25 0.15 0.05 0.15
  remainder
5052 0.25 0.40 0.10 0.10 2.2~2.8 0.15~0.35 - 0.1 - 0.05 0.15 remainder
5083 0.40 0.40 0.10 0.4~1.0 4.0~4.9 0.05~0.25 - 0.25 0.15 0.05 0.15 remainder
5454 0.25 0.40 0.10 0.50-1.0 2.4-3.0 0.05-0.20 - 0.25 0.20 0.05 0.15 remainder
 
Main Aluminum Alloy Physical property

Alloy Temper Specified
Thickness
mm
Tensile
strength
Rm MPa
Yield strength
Rp 0.2 MPa
Elongation
min.
Bend
Radius
Hardness
over Up to Min. Max. Min. Max. A50mm A 180° 90° HBW
5052 O/H111 6 12.5 165 215 65 - 19 - - 2.0t 46
12.5 80.0 165 215 65 - - 18 - - 46
H112 6 12.5 190 - 80 - 7 - - - 55
12.5 40.0 170 - 70 - - 10 - - 47
40.0 80.0 170 - 70 - - 14 - - 47
5083 0/H111 6.3 12.5 270 345 115 - 16 - - - 75
12.5 50.0 270 345 115 - - 15 - - 75
50.0 80.0 270 345 115 - - 14 - - 73
80.0 120.0 260 - 110 - - 12 - - 70
120.0 200.0 255 - 105 - - 12 - - 69
200.0 250.0 250 - 95 - - 10 - - 69
250.0 300.0 245 - 90 - - 9 - - 69
H112 6.0 12.5 275 - 125 - 12 - - - 75
12.5 40.0 275 - 125 - - 10 - - 75
40.0 80.0 270 - 115 - - 10 - - 73
80.0 120.0 260 - 110 - - 10 - - 73
H116 6.0 12.5 305 - 215 - 12 - - 4.0t 89
12.5 40.0 305 - 215 - - 10 - - 89
40.0 80.0 285 - 200 - - 10 - - 83
5454 0/H111 6,0 12.5 215 275 85 - 18   - 2.5t 58
12,5 80,0 215 275 85 - - 16 -   58
H112 ≥ 6,0 12,5 220 - 125 - 8       63
12,5 40,0 215 - 90 -   9     59
40,0 120,0 215 - 90 -   13     59
2024 O 6.0 9.0 - 220 - 140 13 - - 2.5t 55
9.0 12.5 - 220 - 140 13 - - 4.0t 55
12.5 25.0 - 220 - - - 11 - - 55
T3/T351 6.0 12.5 440 - 290 - 13 - - - 124
12.5 40.0 430 - 290 - - 11 - - 122
40.0 80.0 420 - 290 - - 8 - - 120
80.0 100.0 400 - 285 - - 7 - - 115
100.0 120.0 380 - 270 - - 5 - - 110
120.0 150.0 360 - 250 - - 5 - - 104
 


Applications:
The Aluminium block can be used for different vehicle wheel.