block of aluminum 5083

Introduction of block of aluminum 5083
5083 aluminum block is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, and plasticity is still good when hardened by cold work. When hardened, the plasticity is low, the corrosion resistance is good, the weldability is good, the machinability is poor, and it can be polished.


 
The chemical composition of block of aluminum 5083
Al: margin
Si ：≤0.4
Cu: ≤0.1
Mg: 4.0--4.9
Zn: 0.25
Mn: 0.40--1.0
Ti ：≤0.15
Cr: 0.05--0.25
Fe: 0.4
Single: 0.05, Total: 0.15
 
Application of block of aluminum 5083
5083 Aluminum block are mainly used for low-load parts that require high plasticity and good weldability, and work in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil pipes, various liquid containers and other low-load parts made by deep drawing.